Battery; Operating Instructions - Garrett GTP 1350 Owner's Manual

Battery

The Battery scale, shown on the bottom, right hand
corner of the LCD screen, indicates the amount of power
remaining in the batteries.
26
O p e r a t i n g I n s t r u c t i o n s
1. Lower the searchcoil to a level approximately one (1)
inch above the ground.
2. Press the POWER touchpad, two (2) beeps will sound
to indicate the 1350 is ON. Each time the 1350 is turned
on, it returns to the most recent settings it was
programmed to use, with the exception of modifications
made to the Notch Discrimination settings in the pre-
programmed Modes. (See ACCEPT / REJECT on page
19 for additional information)
The 1350 is engineered with Automatic Ground Balance
technology to continuously
mineralization and automatically adjust itself for optimum
performance.
3. Begin scanning by moving the searchcoil from side to
side in front of you, in either a straight line or a slight arc
pattern. Keep the coil level and at a constant height of
measure ground
27