Operate; Accept/Reject - Garrett GTP 1350 Owner's Manual

OPERATE Touchpad
Press the OPERATE touchpad at any time to return to
the hunting mode while making changes or adjustments
during the MENU / SCROLL sequence.
ACCEPT / REJECT Touchpad
Use the ACCEPT / REJECT touchpad to modify the
Notch Discrimination pattern, shown on the Lower Scale
of the LCD screen.
Press the + or - touchpad to move the Target ID cursor to
the right or left. Press the ACCEPT / REJECT touchpad
to activate or delete the LCD cursor, located on the
Lower Scale, directly below the Target ID cursor. Press
the OPERATE touchpad to resume hunting when Notch
Discrimination modifications are completed.
The 1350 does not produce an audible response when it
locates a target found in notched (blank) regions of the
Lower Discrimination scale.
Modifications made to the Lower Discrimination scale in
20
the CUSTOM Mode will be retained when the detector is
turned OFF, until manually changed by the operator or
until the detector is returned to the factory default
settings by pressing and holding the POWER touchpad.
Any changes made to Discrimination settings while
hunting in all other MODES will be lost when the detector
is turned OFF and will return to the factory default
settings.
Discrimination settings can also be modified quickly
when an unwanted target is located while hunting. When
an unwanted target is discovered, press the ACCEPT /
REJECT touchpad to create a Notch (delete the cursor)
for that specific target.
You may want to customize your Discrimination settings
when you are looking for a specific item, a lost earring for
example. You can use the matching earring to set
notches on your GTP 1350 to accept only that target.
Hunting in an area where a specific type of trash is
abundant may be another reason to customize your
Notch Discrimination settings. You can reject the specific
21