Table of Contents
Advertisement
L C D D i s p l a y
Target ID Guide (Legend)
An illustrated Target ID Guide is located directly above
the LCD screen. When hunting, the Target ID cursor will
appear below the illustration that most likely indicates the
type of target found, based on its conductivity. Three (3)
color-coded bands correspond with the Small (red),
Medium (blue) and Large (green) target size shown on
the Profiling display.
Upper Scale
The Upper Scale located at the top of the LCD screen is
used to display the Target ID cursor, which indicates the
probable identity of a detected target. When the Pinpoint
button is held down, this scale is used to display the
strength of the Pinpoint target signal, as a bar increasing
from left to right.
Lower Scale
The Lower Scale, or Notch Discrimination Scale,
24
indicates those regions where the 1350 will or will not
produce an audible signal when a target is located.
Where a notch is present (those regions of the Lower
Scale where no cursors are visible) no audible signal will
be produced by those targets.
The Lower Scale also indicates settings for
SENSITIVITY, THRESHOLD, FREQUENCY, VOLUME
and TONE as well as the depth of a coin-sized target
(measured in inches) when Pinpointing.
Numerical Reference Guide
The Numerical Reference Guide is used to indicate
SENSITIVITY, THRESHOLD, FREQUENCY, VOLUME
and TONE settings as well as the depth (in inches) of a
coin-sized target when Pinpointing.
Profiling Display
Located at the bottom of the LCD screen, the Profiling
Display indicates the size of a target (Small, Medium and
Large).
25
Hide quick links:
Advertisement
Table of Contents
