Battery Replacement—The AT Pro is operating with fresh
or fully charged batteries when 4 illuminated bars on the
Battery Level Indicator (see above) are displayed. The
detector will maintain full performance until the batteries
need to be replaced. Replace batteries when there is only
Remove the battery
cover by rotating
the
cover
one-
quarter turn in a
counterclockwise
direction.
Grasp
the cap by top and
bottom and pull it
straight back. Slide
the
battery
out to replace the
batteries.
48 Garrett Metal Detectors
CARE AND MAINTENANCE
tray
INSERT BATTERY HOLDER
IN THIS POLARITY
Battery Level
Indicator