Setup And Use - Fisher-Price C7050 Instructions Manual

3
6
IMPORTANT! Test sound reception of this monitor before
first time use and whenever you change location of
transmitter (see page 3).
1. Set transmitter channel switch to same channel as receiver.
2. Place transmitter in same room with child. Point
microphone directly toward crib or play area.
3. Unwrap and fully extend AC adaptor cord for best
transmission. Insert AC adaptor jack into transmitter
socket and plug into wall outlet.
4. Rotate transmitter power dial to turn power on. Power
indicator lights.
5. Place receiver where you will see or hear it.
6. Unwrap and fully extend AC adaptor cord for best
reception. Insert AC adaptor jack into receiver socket
and plug into wall outlet.
Setup & Use
2
5
TRANSMITTER
1
RECEIVER
1
Note: To use a battery for power source, refer to
"Receiver Battery Installation" instructions on page 2.
7. Rotate receiver power/volume dial to turn power on.
Power indicator lights. Rotate power/volume dial to
adjust volume.
C7050: Transmitter adaptor is 240 VAC, 50Hz, input;
6 VDC 200mA output; striped line is positive. Receiver
adaptor is 240 VAC, 50Hz input; 6 VDC 100mA output;
centre positive polarity; plug OD is 3.5 mm, plug ID
is 1.3 mm.
C6275: Transmitter adaptor is 230 VAC, 50Hz, input;
6 VDC 60mA output; striped line is positive. Receiver
adaptor is 230 VAC, 50Hz input; 6 VDC 100mA output;
centre positive polarity; plug OD is 3.5 mm, plug ID
is 1.3 mm.
4
4
7