Page 1
900MHz Long Range Monitor Model Number: C7051 For proper setup and use, please read these instructions. Please keep this instruction sheet for future reference, as it contains important information. Transmitter is electrically powered. Includes one AC adaptor to power receiver (plugs into standard household outlets).
Page 2
IMPORTANT! WARNING To prevent strangulation with power cord, never place transmitter within reach of child. CAUTION This product cannot replace responsible adult supervision. • This product is not intended to be used as a medical monitor and its use should not replace adult supervision. •...
Page 3
Receiver Battery Installation (Optional) The receiver operates using the enclosed AC adaptor or battery power. 1.5V x 3 LR03 “AAA” Battery Compartment Shown Actual Size Door • Locate battery compartment door on back of receiver. • Loosen screw in battery compartment door with a Phillips screwdriver.
Page 4
Testing Reception (for Sound) Test transmitter transmission and receiver reception each time you change location of use. Power Indicator Power Switch Power/Volume Dial Power Indicator Set channel switch on transmitter to Place receiver in room in which the same channel as receiver. Place you intend to use it.
Page 5
Testing Reception (for Vibrations) Test transmitter transmission and receiver reception each time you change location of use. Power Power/Volume Indicator Dial Power Switch Vibrations Ready Indicator Power Vibrations Indicator Button Set channel switch on transmitter Clip receiver to your clothing (where to the same channel as receiver.
Page 7
IMPORTANT! Test sound reception of this monitor before first time use and whenever you change location of transmitter (see page 5). Set transmitter channel switch to same channel as receiver. Place transmitter in same room with child. Point microphone directly toward crib or play area. Unwrap and fully extend power cord for best transmission.
Page 8
Set-Up For Vibrations Use “Wah, Wah, Wah…” IMPORTANT! Test reception of this monitor before first time use and whenever you change location of transmitter (see page 5). Set transmitter channel switch to same channel as receiver. Place transmitter in same room with child. Point microphone directly toward crib or play area.
Problems & Solutions Circuit Breaker “Ma, ma, ma. Da, da, da…” “That doesn’t sound right. Maybe we should check the transmitter.”...
Page 10
Problems & Solutions PROBLEMS SOLUTIONS Transmitter power indicator Turn transmitter power on. not lit. Power indicator lights. You hear static or buzzing Make sure channel switches on from receiver. both transmitter and receiver set to same channel. Transmitter power indicator Make sure light switch that not lit.
Page 11
Problems & Solutions “That’s gotta be coming from next door…” “Did you read about…” PROBLEM You can hear conversations or sounds from other homes.
Page 12
“Wah, Wah, Wah…” “That must be Susie next door…” “I better get off the phone, “Wah, Wah, she’s up…” “Wah, Wah, Wah…” Wah…” “Did you read about…” SOLUTION There is signal interference due to other nursery monitors on same channel or cordless telephone use. Change channel switches on both transmitter and receiver to eliminate source of interference.
Page 13
Problems & Solutions “Uh-oh, maybe I should move closer to the house.” SOLUTION PROBLEM The receiver vibrates, all five Receiver is out of range of trans- dots light and if you have the mitter. Move receiver closer to sound turned up – you hear transmitter.
Consumer Information AUSTRALIA Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia. Consumer Advisory Service 1 300 135 312. NEW ZEALAND 16-18 William Pickering Drive, Albany 1331, Auckland.
Page 15
Care Excess dirt in transmitter microphone will hamper transmission of sound. Clean outer surface of transmitter and receiver with a cloth lightly dampened with a mild cleaning solution. Never immerse transmitter, receiver or AC adaptor.
Purchaser is responsible for shipping the product to Consumer Relations at the address indicated above and for all associated freight and insurance cost. Fisher-Price, Inc., will bear the cost of shipping the repaired or replaced item to you. This warranty is void if the owner repairs or modifies the product.