Cisco Digistar EoC User Manual page 4

Important Safety Instructions,
WARNING: To avoid electric shock and fire hazard, match the plug
and outlet connections carefully, then fully insert. If the plug and outlet
do not match, or you can not fully insert the plug, contact an electrician to
update your power outlet.
For a 2-prong plug (a polarized plug with one wide blade and one narrow
blade), insert the plug into a polarized mains, 2-prong outlet in which one
socket is wider than the other.
Note: If you are unable to insert this plug fully into the outlet, try reversing the
plug. If the plug still fails to fit, contact your electrician to replace your outlet.
Overloading
WARNING: Avoid electric shock and fire hazard! Do not overload
main AC outlets and extension cords. For products that require battery
power or other power sources to operate them, refer to the operating
instructions for those products.
Do not overload electrical outlets, extension cords, or integral convenience
receptacles as this can result in a risk of fire or electric shock. For products that
require battery power or other power sources to operate, refer to the operating
instructions for those products.
Preventing Power Cord Damage
Arrange all power cords so that people or pets can not walk on the cords. Do
not place objects on the cords. Do not lean objects against the cords. Placing
objects on or leaning objects against cords can damage the cords. Give particular
attention to cords at the point at which the cord connects to plugs, at the
electrical outlets, and where the cords exit the product.
Usage Warnings
Providing Ventilation
Continued
Continued on next page
4