JVC KD-DV6404 Instructions Manual page 220

Dvd/cd receiver
Table of Contents

Advertisement

D
Required connections for DVD and AV IN playback
KV-MR9010
9-INCH WIDESCREEN MONITOR
*
3
E
Connecting the external amplifier
You can connect an amplifier to upgrade your car stereo system.
• Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be controlled through this unit.
• Disconnect the speakers from this unit, connect them to the amplifier. Leave the speaker leads of this unit unused.
Rear speakers
JVC Amplifier
F
Connecting the external components
When connecting the external components, refer also to the manuals supplied for the components and adapter.
CAUTION:
Before connecting the external components, make sure that the unit is turned off.
You can connect the following JVC components to the CD changer jack.
JVC component
CD changer (CD-CH)
You can also connect the following components through the various JVC adapters.
• Connection cords may need to be purchased separately.
Component
iPod
Portable audio player with line input jacks
Portable audio player with 3.5 mm stereo mini jack
When connecting an external component
You can also connect an external component to the LINE IN plugs on the rear of the unit using a signal cord (not supplied).
iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
*
3
Not supplied for this unit.
*
4
Signal cord (not supplied for this unit).
*
5
Firmly attach the ground wire to the metallic body or to the chassis of the car—to the place uncoated with paint (if coated with paint, remove the paint before attaching the wire). Failure to do so may cause damage to the unit.
CD-CH / KS-PD100 /
CD changer jack
KS-U57 / KS-U58
*
3
Video cord
Audio/video control amplifier or the decoder
compatible with the multichannel digital sources
Remote lead
Remote lead (blue with white stripe)
Adapter
Interface adapter for iPod
Line input adapter
AUX input adapter
To disconnect the connector
4
Digital optical cable
*
Y-connector
3
To the remote lead of other equipment or automatic antenna if any
Front speakers
Hold the connector tightly ( 1 ), then pull it out ( 2 ).
External component
*
3
Model name
CH-X1500, etc.
Model name
KS-PD100
KS-U57
KS-U58

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents