JVC KD-DV6404 Instructions Manual page 125

• The iPod does not turn on or does not work.
• The sound is distorted.
• "NO IPOD" appears on the display.
• Playback stops.
• No sound can be heard when connecting an
iPod nano.
• "NO FILES" appears on the display.
• "RESET 1" – "RESET 7" appears on the display. Disconnect the adapter from both this unit and iPod.
• "RESET 8" appears on the display.
• The iPod's controls do not work after
disconnecting from this unit.
• No picture appears on the monitor.
• Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
• "DTS" and "DTS Digital Out" are registered trademarks of DTS, Inc.
• "DVD Logo" is a trademark of DVD Format/Logo Licensing Corporation registered in the US, Japan and other
countries.
• DivX, DivX Ultra Certified, and associated logos are trademarks of DivX, Inc. and are used under license.
• Official DivX® Ultra Certified product
• Plays all versions of DivX® video (including DivX® 6) with enhanced playback of DivX® media files and the DivX®
Media Format
• Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
• iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
Symptom Remedy/Cause
• Check the connecting cable and its connection.
• Charge the battery.
• Update the firmware version.
Deactivate the equalizer either on this unit or the iPod.
• Check the connecting cable and its connection.
• Charge the battery.
The headphones are disconnected during playback.
Restart the playback operation (see page 21).
• Disconnect the headphones from the iPod nano.
• Update the firmware version of the iPod nano.
No tracks are stored. Import tracks to the iPod.
Then, connect it again.
Check the connection between the adapter and this
unit.
Reset the iPod.
• Turn on the video component if it is not on.
• Connect the video component correctly.
REFERENCES 37