How To Use The Elliptical - NordicTrack Elite 12.7 User Manual

HOW TO USE THE ELLIPTICAL

HOW TO PLUG IN THE POWER CORD
This product must be grounded. If it should malfunc-
tion or break down, grounding provides a path of least
resistance for electric current to reduce the risk of
electric shock. The power cord has a plug with a
grounding pin.
DANGER:
the power cord increases the risk of electric
shock. Do not modify the plug; if it will not fit
an outlet, have a proper outlet installed by a
qualified electrician. If you are unsure whether
the product is properly grounded, contact a
qualified electrician.
Plug the power
cord into an
appropriate
outlet that is
properly installed
and grounded in
accordance with
all local codes
and ordinances.
The outlet must
be on a nominal
120-volt circuit.
Improper connection of
Grounded Outlet
Grounding Pin
A temporary
adapter may be
used to con-
nect the power
cord to a 2-pole
receptacle as
shown at the
right if a prop-
erly grounded
outlet is not
available.
The lug or wire extending from the adapter must
be connected with a metal screw to a permanent
ground such as a properly grounded outlet box cover.
Some 2-pole receptacle outlet box covers are not
grounded. Before using an adapter, contact a quali-
fied electrician to determine whether the outlet
box cover is grounded before using an adapter.
The temporary adapter should be used only until
a properly grounded outlet can be installed by a
qualified electrician.
HOW TO ADJUST THE POSITIONS OF THE
PEDALS
Each pedal can be adjusted to several positions. To
adjust each pedal, simply pull the pedal handle out-
ward, move the pedal to the desired position, and
then release the pedal handle into an adjustment hole
beneath the pedal. Make sure to adjust both pedals
to the same position.
Pedal
Handle
13
2-pole Receptacle
Adapter
Lug
Metal Screw