Mounting The Switch On A Wall; Applying Power - KTI Networks KGS-0600 User Manual

7. Mounting the Switch on a Wall

The switch can be mounted on a desktop or shelf or a wall. Make sure that there is proper heat dissipation from
and adequate ventilation around the device. Do not place heavy objects on the device.

8. Applying Power

Before you begin the installation, check the AC voltage of your area. The AC power adapter which is used to supply
the DC power for the unit should have the AC voltage matching the commercial power voltage in your area.
The AC-DC power adapter bundled in the product package may be one of the following options:
Rated AC120V/60Hz DC options: 7.5V / 5V / 12V
Rated AC100V/60Hz DC options: 7.5V / 5V / 12V
Rated AC230V/50Hz DC options: 7.5V / 5V / 12V
Rated AC240V/50Hz DC options: 7.5V / 5V / 12V
All options are working within the DC IN specifications.
The steps to apply the power to the product are:
1. Connect power adapter DC plug to the DC input jack located on the back of the unit before connecting to the
AC outlet.
2. Connect the power adapter to the AC outlet.
3. Check Power LED indication.
Note: Before you begin the installation, check the AC voltage of your area. The AC power adapter which is
used to supply the DC power for the unit should have the AC voltage matching the commercial power voltage
in your area.
-9-