Loading Batteries And Label Cassette - Panduit PanTher LS8EQ Operator's Manual

LOADING BATTERIES AND LABEL CASSETTE

Loading the Batteries
1. Remove the battery door from the back of the P
the impact bumper is installed on the printer, you will have to move it away
from the battery door first.
2. Install the 6 AA batteries according to the molded indicators within the battery
compartment.
3. Reattach the battery door. Move the impact bumper back over the battery
door if necessary.
Observe Correct Polarity When Installing
Batteries
Replace All Six Batteries At The Same Time
Loading a Label Cassette
1. Remove the cassette door from the back of the P
2. Install a label cassette. Press firmly to lock the cassette in place. Do not
remove the raised white tab from the cassette. This tab is used to assist with
removal of the cassette from the LS8EQ printer.
3. Lock the print head latch.
4. Reattach the cassette door.
NOTE: To uninstall a label cassette:
1. Unlock the print head latch.
2. Remove the cassette door.
3. Remove the cassette. Use the white removal tab on the
cassette for assistance.
4. Reattach the cassette door.
™ LS8EQ printer. If
T
AN HER
™ LS8EQ printer.
T
AN HER
Print Head Latch
9