Advertisement
Part No. | Description |
MP100 | Includes MP100 printer with protective impact bumper, 1 cassette of T100X000VPM-BK, USB cable, and power adapter (MP100-AC). For use in North America |
MP100/E | Includes MP100 printer, 1 cassette of T100X000VPM-BK, USB cable, power adapter (MP100-AC) and international power cord(s). For use outside of North America |
MP100-ACS | Replacement 120-240 VAC universal power adapter module with power cord for North America. |
MP100-IB | Replacement MP100 Impact Bumper |
Label Material | Example Part No. | Typical Application |
Self-Laminating Vinyl Tape | S000X150VAM | Wire/Cable Marking |
Heat Shrink Tubing | H000X044H1M | Wire/Cable Marking |
Nylon Cloth Tape | T100X000C1M-BK | Wire/Cable Marking |
Polyolefin Tape | T038X000FJM-BK | Terminal Block Labeling |
Colored Vinyl Tape | T100X000VPM-BK | Safety/Facility and General Identification |
Clear Polyester Tape | T100X000YKC-BK | Safety/Facility and General Identification |
Magnetic Tape | T100X000MXM-BK | Safety/Facility and General Identification |
Included Items
Using batteries:
Always use AA-size alkaline batteries.
Using the AC Adapter:
Always use the included AC adapter
Insert a label cassette into the printer:
| Protects the printer. |
| Turns the printer power ON/OFF. |
| Indicates the printer's error status. |
| Indicates the printer battery's remaining charge (approximate). |
| Bluetooth indication. |
| Pull this tab to open the printer cover. |
| Printed labels come out here. |
| Can be opened to insert a tape cartridge, or for print head cleaning. |
| Press this button and the button at the same time to enable/disable Bluetooth. |
| Connects the included AC adapter. |
| Connects the included USB cable. |
| Opened when inserting or replacing batteries. |
| Lets you secure the printer to a desk or post with a commercial security cable lock or similar device. |
When pairing is complete, start the mobile applications on the mobile device to create labels.
At the time of purchase, the Bluetooth function is set to be enabled when you turn on the power of the printer. This can be switched between enable and disable by button operation.
You can check the state of the Bluetooth function with the lamp.
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc.
Android™ logo is a trademark of Google Inc.
iOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.
Do not connect the printer and computer before installing the software.
Connect the printer as directed in the installation screen.
MEMO
Install the printer driver.
Meanings of lamps
The lamps indicate printer statuses.
Lamp's condition *: Depends on printer operation status --: Unlit | Printer status | ||
-- | * | Fading in and out | Bluetooth enabled. Or connected to an Android device or Windows computer. |
* | * | Lit | Bluetooth connection completed. (when connecting to an iOS device) |
-- | * | Flashing quickly | Performing operation such as printing or label cutting. |
-- | * | Flashing (once every 5 seconds) | Bluetooth disabled. |
-- | -- | -- | Power OFF. |
* | Lit | * | Low batteries and to be replaced. Have replacement batteries ready. |
* | Flashing quickly | * | Replace batteries. |
Note: Please refer to the instruction label in cassette compartment for the printer head cleaning.
Example using T100X000VXM-BK, black on yellow continuous vinyl tape:
Visit www.panduit.com
Free Downloads
Path: Support / Download Center / Software Firmware Printers
Warranty Registration
Path: Support / Product Registration
Related Products
PANDUIT TECHNICAL SUPPORT
1-866-871-4571
GA-TECHSUPPORT@PANDUIT.COM
Part Number: MP100-QRC-EN, Rev 3.8
DWG Number: 00210ECB
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the MP100 that isn't answered in the manual? Leave your question here.