Setting Demo Mode; Switching Sound Muting/Attenuation; Setting The Rear Output And Subwoofer Controller - Pioneer AVH-X5600BT Operation Manual

Section
19 System settings
4 Touch the desired language.
English (English)—Português (Portuguese)—
Español (Spanish)—Français (French)—
Deutsch (German)—Русский (Russian)—
Italiano (Italian)—Nederlands (Netherland)—
Türkçe (Turkish)
# If a language other than Russian is selected,
English is used for the following items.
— On-screen display
— Multi language setting for DivX

Setting Demo Mode

Once Demo Mode is turned on, the Demo
screen appears.
Refer to Demo mode on page 8.
1 Press the home button to switch to the
home display.
2 Touch the system key to open the sys-
tem menu.
3 Touch Demo Mode on the system menu
to turn Demo Mode on or off.
! On – The Demo screen appears.
! Off – The Demo screen does not appear.
Switching sound muting/
attenuation
In order to use this function, the unit's yellow/
black lead must be connected to equipment
with a mute function.
For more details, refer to the installation man-
ual.
Sound from this system is automatically
muted or attenuated when a signal from
equipment with a mute function is received.
! Sound from this system returns to normal
when the muting or attenuation is can-
celed.
1 Press the home button to switch to the
home display.
66
En
2 Touch the system key to open the sys-
tem menu.
3 Touch Mute/ATT until the desired set-
ting appears.
Touch Mute/ATT until the desired setting ap-
pears in the display.
! Mute – Muting
! ATT –20dB – Attenuation (ATT –20dB has a
stronger effect than ATT –10dB)
! ATT –10dB – Attenuation
! Off – Turns the sound muting/attenuation
off
Notes
! When Mute is displayed, the sound is turned
off and no audio adjustments can be made.
! When ATT is displayed, the sound is attenu-
ated and only the volume can be adjusted.
(No other audio adjustments can be made.)
! Operation returns to normal when the phone
connection is ended.
Setting the rear output and
subwoofer controller
This unit's rear output (rear speaker leads out-
put and RCA rear output) can be used for full-
range speaker (Full) or subwoofer
(Subwoofer) connection. If you switch the
rear output setting to Subwoofer, you can
connect a rear speaker lead directly to a sub-
woofer without using an auxiliary amp.
Initially, the unit is set for a rear full-range
speaker connection (Full).
1 Turn the source off.
Refer to Turning the source ON/OFF on page
10.
2 Press the home button to switch to the
home display.
3 Touch the system key to open the sys-
tem menu.