Samsung ITP-5112L User Manual page 21

Ip keyset for officeserv 100; officeserv 500; officeserv 7000 series

Hide thumbs Also See for ITP-5112L:

Table of Contents

Load and Upgrade Set/Modify

The fourth item [4. Load & Upgrade Setup] sets or modifies the IP phone's soft-

ware version. Use extreme caution when upgrading the keyset.

Select the [4. Load & Upgrade] item. The screen below is displayed.

1.TFTP Server Setup

2.Upgrade Start

•

[1.TFTP Server Setup]: This option is used to enter the IP address of the TFTP

Server which hosts the ITP software.

•

[2.Upgrade Start]: When you select this option, the software from the TFTP

server will be pushed to the ITP phone.

Registering and Authenticating the ITP to your System

The fifth item [5. System Server Setup] sets or modifies settings related to the

registering the ITP to the MCP. Select the [5.System Server Setup]. The screen

below will be displayed.

1.System Server

2.System ID

3.System Password

You can set/modify the IP address of the MCP at the [1. System Server] item. The

screen below is displayed when you enter the item. The server IP is the IP address

of the MCP.

Server IP Address

xxx.xxx.xxx.xxx

You can confirm the current IP address of the authentication server at the LCD

panel.The address is left blank if it is not set. Use the dial buttons from [0]-[9], and

[,] to set the IP address and press the [ENTER] button among the navigation but-

tons to save and exit.

Next select the [2. System ID] item and the screen below will be displayed.

Phone ID

xxxx

Table of Contents

Show Quick Links

Table of Contents