Volume Controls - Samsung ITP-5112L User Manual

TERMINAL STATUS INDICATOR
The terminal status indicator light is positioned on the top right corner of the key-
set above the display. The terminal status indicator is a tri-colored (red, green, and
amber) light that provides greater visibility of your keysets status than the indi-
vidual button LEDs. The terminal status indicator provides the following indica-
tions:
• Busy/Off Hook
• Intercom Ring
• Outside Call Ring
• Recall Ring
• Message Waiting
• Do Not Disturb
SELECT BUTTONS
The 5112L keysets incorporate twelve select buttons. These buttons are posi-
tioned six on either side of the LCD screen.
The top left and right buttons are used to page up and page down screens.
The remaining five buttons on either side of the display are programmable. There
are ten programmable buttons per programmable feature screen, with the excep-
tion of the last screen, which has nine programmable buttons. The total program-
mable buttons per 5112L station is ninety-nine. Any system feature or function can
be assigned to these buttons.

VOLUME CONTROLS

The 5112L keysets use the UP and DOWN buttons to adjust the ringer volume
while the keyset is ringing, the speaker volume while the speakerphone is in use
and the handset volume while you are listening. These three levels will be stored
in memory until changed. If background music is turned on at your keyset, the vol-
ume buttons will also control the level of music. The volume of pages heard
through the speaker of a keyset can be adjusted during a page announcement by
using the volume buttons.There are 16 levels for each volume setting.The volume
of off-hook ring is controlled by a user-programmable setting.
Steady Red
Flashing Red
Flashing Blue
Flashing Amber
Flashing Red
Fast Flash Red at 1 Second Intervals
3