usinG the touch controL Pads
If more than one touch pad is pressed for longer than 1
minute,
touch the On/Off control pad.
hoW to set the aPPLiance for cooktoP cookinG
CAUTION
seLect cookinG Zone on
1. To switch on the cooking zone, touch the On/Off control pad.
2. The digital displays will show
After you have activated the On/Off control pad to switch on your appliance, you must
select a power setting within approximately 5 seconds. Otherwise, the appliance will switch
itself off for safety reasons.
PoWer settinG
1. In the next 5 seconds, move your finger along the control
panel until the desired power level setting appears in the digital
display.
• Display will show 5.0 when you select the + or - touch pad.
2. To set and adjust the power level from (
cooking, touch the Power level setting selectors (+ or -).
(BEST) NE597N0PBSR_AC_DG68-00427A_EN_120424.indd 22
appears in the power setting display. To reset,
• The cooktop elements can be hot and can cause burns. Do not touch the surface
elements until they have cooled down sufficiently.
• Never leave cooking food unattended when you set the heating element to 6 or
higher. Boilovers cause smoke. Greasy spillovers may catch on fire.
• Be sure you turn the Touch control to OFF when you finish cooking.
.
to
) for
induction cooking _22
2012-04-24
7:52:26