Replacing Tail Lamp/Backup Lamp Bulbs - Ford 2011 Ranger Owner's Manual

Lights

Replacing tail lamp/backup lamp bulbs

1. Make sure the headlamp switch is
in the off position, then open the
tailgate to expose the lamp
assemblies.
2. Remove the four screws and the
lamp assembly from vehicle.
3. Rotate bulb socket
counterclockwise turn and remove
from lamp assembly.
4. Carefully pull the bulb straight
out of the socket.
Install the new bulb(s) in reverse
order.
46
2011 Ranger (ran)
Owners Guide, 1st Printing
USA (fus)