Switching On The Appliance; Selecting The Temperature; Temperature Warning; Warning Signal - Siemens KA Operating And Installation Instructions

Table of Contents

Advertisement

Switching on the
appliance
Switch on the appliance with the
On/Off button.
Press the alarm/lock" button.
The warning signal switches off.
The alarm" display goes out as soon
as the set temperature has been
reached.
The factory has recommended the
following temperatures:

Refrigerator compartment:

Freezer compartment:
cool fresh" drawer
(freshProtectbox):
Selecting the
temperature
The required area must be selected
before temperatures can be set for the
different temperature zones (refrigerator
compartment, freezer compartment,
cool fresh" drawer).
To do this, keep pressing the select"
button until the required zone is
marked with an arrow.
Refrigeratorcompartment
1. Press the select" button until
a triangle is indicated on the
refrigerator compartment display
panel.
2. Set the temperature with the
+" (warmer) or -" (cooler)
selection buttons.
The temperature can be set at 1 °C
intervals.
The refrigerator compartment can be
set from +2 °C to +8 °C.
Perishable food should not be stored
warmer than +4 °C.
Freezer compartment
1. Press the select" button until
a triangle is indicated on the freezer
compartment display panel.
2. Set the temperature with the
+" (warmer) or -" (cooler)
selection buttons.
+4 °C
The freezer compartment can be set
-18 °C
from 14 °C to -26 °C.
The value last indicated is saved by the
+2 °C
system.
cool fresh" drawer
(freshProtectbox)
1. Press the select" button until
a triangle is indicated on the
cool fresh" drawer
(freshProtectbox) display panel.
2. Set one of the temperature ranges
0 °C/+2 °C/+4 °C with the
+" (warmer) or -" (cooler) selection
buttons.

Warning signal

In the following cases a warning signal
may sound.
The door warning signal
The door warning signal sounds if one
of the appliance doors is open for
longer than one minute. Close the door
to switch off the warning signal.
Press the alarm/lock" button to switch
off the warning signal.

Temperature warning

signal
The temperature warning signal
switches on if the freezer or refrigerator
compartment is too warm and the food
is at risk of thawing.
The acoustic and optical signals may
be actuated without risk to the frozen
food when:
S The appliance is switched on.
S Large quantities of fresh food are
placed in the freezer.
Freezer compartment
AL" flashes on the freezer compart
ment display panel and alarm" is
displayed.
Press the alarm/lock" button to switch
off the warning signal.
The temperature display indicates for
10 seconds the warmest temperature
which was reached in the freezer
compartment. Then the set
temperature is displayed again.
The alarm" display goes out as soon
as the set temperature has been
reached.
Attention!
Do not refreeze food which has started
to thaw or already thawed. It can only
be refrozen when it has been used to
prepare a ready meal (boiled or fried).
No longer store the frozen produce for
the max. storage period.
Refrigerator compartment
AL" flashes on the refrigerator
compartment display panel and
alarm" is displayed.
Press the alarm/lock" button to switch
off the warning signal.
Attention!
If the refrigerator compartment has
become too warm, cook warmed
refrigerated food before consumption.
If in doubt, do not use raw food.
en
33

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

DKa**d

Table of Contents