Using A Rear Viewcamera; Activating/Deactivating The Rear View Camera; Checking The Rear View - JVC KW-NT1 Instructions Manual

• To use arear view camera, the REVERSE GEAR SIGNAL lead connection is required. For connecting arear view
camera,
l&
Installation/Connection Manual.
Using a rear viewcamera
Checking the rear view _
1
On map screen
On
Select when connecting arear view
camera to the CAMERA IN jack. The
picture from the camera is displayed as
it is taken.
Off
Select when no rear view camera is
connected to the CAMERA IN jack.
2
Activating/deactivating the rear
view camera _
1
When <On> is selected, the rear view screen is
displayed when you shift the gear to the reverse (R)
position.
• When you perform one of the following operations,
the rear view screen is cleared and you cannot go
back to the rear view screen.
- Press
[~or
[ _ .
- Press AV MAP.
- Shifting the gear to another position other than
the reverse (R) position.
86