Table of Contents
Advertisement
Video Input
Input Source Selection
Direct Operation
Choose either Video or Computer by pressing the INPUT button
on the top control or VIDEO or COMPUTER button on the remote
control.
Before using these buttons, a correct input source should be
selected through Menu Operation as described below.
Menu Operation
1
Press the MENU button to display the On-Screen Menu.
Press the Point
to the Input Menu icon.
2
Press the Point
Video or Computer and then press the SELECT button. The
Source Select Menu will appear. When selecting VIDEO,
video input is selected. When selecting COMPUTER, go to
Step 3 to select an input source.
3
Move the pointer to a correct input source and then press
the SELECT button.
When the input source is connected to the
S-Video
COMPUTER / S-VIDEO / COMPONENT IN with
a S-Video-VGA Cable, select S-Video.
When the input source is coming from video
Component
equipment connected to the COMPUTER /S-
VIDEO / COMPONENT IN with a Component-
VGA Cable, select Component.
When the input source is coming from video
RGB (Scart)
equipment connected to the COMPUTER / S-
VIDEO / COMPONENT IN with a Scart-VGA
Cable, select RGB (Scart).
✔
Note:
• S-Video-VGA Cable, Component-VGA Cable and Scart-VGA Cable are optionally
supplied. See page 57 for order.
32
7 8
buttons to move the red frame pointer
button to move the red arrow pointer to
d
Top Control
WARNING
POWER
LAMP
REPLACE
INPUT
ON - OFF
MENU
SELECT
Remote Control
Input Menu icon
Input Menu
Move the pointer (red arrow)
to Computer and press the
SELECT button.
Computer
Source Select Menu
Move the pointer to S-Video,
Component, or RGB (Scart)
and then press the SELECT
button.
INPUT
button
Computer
Video
COMPUTER
button
VIDEO
button
Advertisement
Table of Contents
