Selecting The Output Source (Current Source) - Tascam CD-200iL Owner's Manual

Cd player/ipod dock

Hide thumbs Also See for CD-200iL:

Table of Contents

3 – Preparations

Selecting the output source (current

source)

With this unit, you can select CD, DOCK (iPod or iPhone) or AUX

IN as the playback source of the audio signal for output.

Press the PLAY MODE/INTRO CHECK [SOURCE SEL] button

while pressing the DISPLAY [SHIFT] button on the main unit or

press the SOURCE SEL button on the remote control.

Cycle through the current media options in the following order.

Current source selection order

Display when current source is set to

CAUTION

•

and

cannot be selected when no corre-

-DOCK-

-AUX-

sponding device is connected.

• If a CD is playing back or paused when the current source

is changed from

-CD-

Moreover, if the iPod or iPhone is playing when the current

source is changed from

-DOCK-

will pause.

NOTE

Even when the current source is changed, CD playback

mode settings, the current folder selection and program

contents are not erased.

TASCAM CD-200iL

-CD-

-DOCK-

-AUX-

, playback will stop.

-DOCK-

, playback

-AUX IN-

Table of Contents