Table of Contents
Advertisement
2 – Names and functions of parts
PLAY MODE/INTRO CHECK [SOURCE SEL] button
e
When the current source is
change the playback mode. The three playback modes are
continuous, shuffle and program. (See "Playback modes" on
page 20.)
During playback or when stopped, press and hold this
button to conduct intro check playback. During intro check
playback, press and hold this button again to return to the
ordinary playback mode. (See "Intro check function" on page
26.)
When the current source is
change the iPod/iPhone shuffle playback mode
"iPod/iPhone control" on page 27.)
While pressing and holding the DISPLAY [SHIFT] button,
press this button to change the current source in the
following order.(See "Selecting the output source (current
source)" on page 18.)
Current source order
NOTE
and
cannot be selected if no corre-
-DOCK-
-AUX-
sponding device is connected.
REPEAT [PITCH ON/OFF] button
r
When the current source is
the repeat playback function on/off and select the repeat
playback mode. (See "Repeat playback" on page 24.)
While pressing and holding the DISPLAY [SHIFT] button,
press this button to turn the pitch control function on/off.
(See "Pitch control playback" on page 26.)
When the current source is
to change the repeat playback mode. (See "iPod/iPhone
control" on page 27.)
FOLDER g/t [PITCH −/+] buttons
t
When the current source is
use these buttons to change the folder that will be played
back. (See "Folder playback (data CDs)" on page 21.)
While pressing and holding the DISPLAY [SHIFT] button,
use these buttons to set the CD pitch control value. (See
"Pitch control playback" on page 26.)
When the current source is
to skip among the albums on the iPod or iPhone (select
albums). (See "iPod/iPhone control" on page 27.)
10
TASCAM CD-200iL
, press this button to
-CD-
, press this button to
-DOCK-
(See
.
, press this button to turn
-CD-
, press this button
-DOCK-
and a data CD is loaded,
-CD-
, use these buttons
-DOCK-
iPod dock
30-pin dock connector
y
Use this connector to connect an iPod or iPhone that uses a
30-pin dock connector.
NOTE
When connecting an iPod or iPhone with a 30-pin
connector, be sure to attach a dock adapter suitable for
your iPod or iPhone to the 30-pin dock connector. Dock
adapters are not included with this product. Use one
that came with your iPod or iPhone or purchase an Apple
Universal Dock Adapter made by Apple Inc.
Lightning connector
u
Use this connector to connect an iPod or iPhone that uses a
Lightning connector.
Backstop
i
Raise this backstop before connecting an iPod or iPhone
that uses a Lightning connector.
Unlocking lever
o
Use this lever to unlock the iPod dock in order to store it.
To store the iPod dock, pull this lever while pressing the
dock toward the front of the unit.
Advertisement
Table of Contents
