Zenoah EXZ2610DL Owner's Manual page 24

EXZ2610DL
8. Operation
Adjust the pump as follows:
1. Stop the engine and make sure the stop switch is in
the OFF position.
2. With a screwdriver, turn the oil flow rate adjusting
screw to the desired direction.
(a) Clockwise-oil flow increase
(b) Counter clockwise-oil flow decrease
(c) Middle
WARNING
• Always wear work gloves made of leather or some
other sturdy material when using the pruner.
• Falling branches may fall onto the face or into the
eyes, resulting in injuries, scratches, and cuts, and
for this reason you should always be sure to wear
a helmet and face protector when using your
pruner.
GB-24
(PS-EX2 only)
(b)
30°
(c)
30°
(a)
Page 24 13.10.16, 9:26 AM