Tcp/Ip Settings In Windows; Windows 7 - Buffalo NFinity WLI-UC-G300HP User Manual

Appendix

TCP/IP Settings in Windows

Windows 7

To configure TCP/IP in Windows 7, follow the procedure below.
1
Click [Start] > [Control Panel] > [Network and Internet].
2
Double click [Network and Sharing Center].
3
Click [Change Adapter Settings] on the left side menu.
4
Right click on [Local Area Connection], then click [Properties].
5
If the message "Windows needs your permission to continue" appears, click [Continue].
6
Select [Internet Protocol Version 4 (TCP/IPv4)] then click [Properties].
7
To have DHCP set your IP address settings automatically, check [Obtain an IP address
automatically] and [Obtain DNS server address automatically].
To set your IP address settings manually, enter values for each settings. Example:
If the router's IP address is 192.168.11.1, then
IP address
Subnet mask
Default gateway
Preferred DNS server
Alternate DNS server
8
Click [OK].
WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual
192.168.11.80
255.255.255.0
192.168.11.1
192.168.11.1
blank
67