Chapter 4 - Client Manager
Software Overview
Client Manager is utility software used to connect to an access point on the network or to verify the
connection between an access point and your computer. It is included with this device.
Note:
There are two versions of Client Manager, "V" and "3".
Client Manager V supports Windows 7 and Vista.
Client Manager 3 supports Windows XP and Windows 2000.
Using Client Manager V for Windows 7/Vista
Opening and Closing Client Manager
• When you install Client Manager, it will be added to your Startup folder and will automatically
launch with Windows. If Client Manager does not launch automatically, click [Start] > [All
Programs] > [BUFFALO] > [AirStation Utility] > [ClientManager V] .
• Right-click on the Client Manager icon in the system tray and click [Exit] to close Client Manager.
The appearance of Client Manager changes according to its connection status:
:
No wireless connection.
Communicating via an access point.
WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual
31