Buffalo NFinity WLI-UC-G300HP User Manual page 22

Chapter 3 Connect to a Wireless Network
4
Use a computer with a wired connection to the access point to log in to the access point.
Navigate to the WPS PIN page.
Note: If the access point is a Buffalo AirStation, navigate to [Wireless Config]> [WPS] to enter the PIN.
5
Configuration will take several seconds. When "Connection has been completed" is displayed, you
are connected.
WLI-UC-G300HP / WLI-UC-G300HP-V1 User Manual
This screen will be displayed.
On the configuration screen of
the access point, enter the PIN
code you wrote down in step 2.
Note: For a Buffalo AirStation, enter
the PIN in [Enrollee PIN] and
click [OK].
21