Operating An Audio Device With This Unit; Deleting Registration Of All Paired Devices; Other Functions; Changing The Sound Settings - Sony MEX-BT2700 Operating Instructions Manual

Operating an audio device with this
unit
You can perform the following operations on this
unit if the audio device supports AVRCP (Audio
Video Remote Control Profile) of Bluetooth
technology. (The operation differs depending on
the audio device.)
*
Depending on the device, it may be necessary to
press twice.
Operations other than the above should be
performed on the audio device.
Notes
• During audio device playback, information such as
track number/time, playback status, etc., of a
connected audio device is not displayed on this unit.
• Even if the source is changed on this unit, playback
of the audio device does not stop.
Tip
You can connect
a
cellular phone that supports A2DP
(Advanced Audio Distribution Profile) as an audio
device and listen to music.
To
Play
Pause
Skip tracks
Press
®
(PAUSE)* on this unit.
®
(PAUSEy on this unit.
SEEK-/+
(~/~)
[once for
each track]
Other functions
Changing the siund settings
Adjusting the sound
characteristics
1
Press the select button repeatedly
until the desired item appears.
2
Rotate the control dial to adjust the
selected item.
After 5 seconds, the setting is complete and
the display returns to normal play/reception
mode.
The following items can be set (follow the page
reference for details):
EQ3
Selects an equalizer curve from 7 music types.
LOW*1, MID*1, HI*1 (page 18)
BAL
(Balance)
Adjusts the sound balance between the left and
right speakers.
FAD
(Fader)
Adjusts the relative level between the front and . .
rear speakers.
leleling Jegistratilnal all
Ilirellevilis
1
Press
(OFF).
This unit is turned off.
2
If
"0"
lights, press and hold
(]I) until
"0"
turns off.
3
Press and hold the select button.
4
Press the select button repeatedly
until "BT INIT" appears.
5
Press
(SEEK)
+.
Initializing starts.
It takes 3 seconds to cancel all registration.
Do not turn off the power while "INITIAL" is
flashing.
SUB*2
(Subwoofer volume)
Adjusts the subwoofer volume.
("ATT" is the lowest setting.)
AUX*3
(AUX level)
Adjusts the volume level for each connected
auxiliary equipment: "+ 18 dB" - "0 dB" - "-8
dB."
This setting negates the need to adjust the
volume level between sources.
BTA*4
(BT-Audio level)
Adjusts the volume level for each connected
Bluetooth audio device. This setting negates the
need to adjust the volume level between sources
(page 16).
Adjustable level: "+ 18 dB" - "0 dB" - "-8 dB."
*
I
When EQ3 is activated.
*2 When the audio output is set to "SUB-OUT"
(page 18).
*3 When AUX source is activated.
*4 When Bluetooth audio source is activated
(page 16).
17