Getting Started; Step 1: Charging The Battery Pack - Sony Handycam DCR-SR45 Operating Manual

Getting Started
Step
1:
Charging the battery pack
•
us
9
For DCR-SR4S/SR46:
Connect the power cord (mains
lead) to the AC Adaptor and the wall
outlet (wall socket).
The CHG (charge) lamp lights up and
charging starts.
4
For DCR-SR6S/SR8S:
Connect the power cord (mains
lead) to the AC Adaptor and the
wall outlet (wall socket). Insert
the camcorder into the Handycam
Station securely, all the way to the
bottom.
• When setting the camcorder onto the
Handycam Station, close the DC IN jack
cover.
3
For DCR-SR6S/SR8S:
Connect the AC Adaptor to the DC
IN jack on the Handycam Station.
For DCR-SR4S/SR46:
Connect the AC Adaptor to the DC
IN jack on your camcorder.
Open the jack cover and connect the
DC plug of the AC Adaptor to the DC
IN jack.
2
Attach the battery pack by sliding it
in the direction of the arrow until it
clicks.
1
Turn the POWER switch in the
direction of the arrow to OFF (CHG)
(the default setting).
You can charge the IlnfoLiTHIUM"
battery pack (H series) after attaching
it to your camcorder.
U
Notes
• Your camcorder operates only with an
"InfoLITHIUM" battery pack (H series).
CHG lamp
Power cord
(Mains lead)
AC Adaptor
-~-4 ..
L..
To the wall outlet
(wall socket)
AC Adaptor
-H.-!i=---=~f-- DC IN jack
Battery pack
DCR-SR45/SR46
DC plug
With the'" mark on the right
DCR-SR65/SR85