Restore Default Settings; Keyboard Emulation; Mouse Emulation Control; Mouse Port Switching - ATEN CS1942 User Manual

CS1942 / CS1944 User Manual

Restore Default Settings

To reset the CS1942 / CS1944 to its default hotkey settings, do the following:
1. Invoke HSM (see page 20).
2. Press [R] [Enter].
All hotkey settings return to the factory default settings.

Keyboard Emulation

To toggle between keyboard emulation enabled and disabled, do the following:
1. Invoke HSM (see page 20
Press [N].

Mouse Emulation Control

To toggle between mouse emulation enabled and disabled, do the following:
1. Invoke HSM (see page 20
2. Press [M].

Mouse Port Switching

Mouse Port Switching allows you to use the mouse wheel button (clicked
twice) to switch ports. For Mouse Port Switching to work Mouse Emulation
must be enabled.To toggle between mouse port switching enabled and
disabled, do the following:
1. Invoke HSM (see page 20
Press [W].

Power On Detection

With Power on Detection if one of the video sources is powered off the CS1942
/ CS1944 automatically switches to the next powered-on source. To toggle
between Power on Detection enabled and disabled, do the following:
1. Invoke HSM (see page 20
Press [E].
24
).
).
).
).