Using 3 Deluxe Controllers - Rinnai BC 70 2A Installation And User Manual

OPERATION WITH DELUXE TEMPERATURE CONTROLLERS

Using 3 Deluxe Controllers

(Option available with Infinity and HD models)
When 3 Deluxe Temperature Controllers are used, they must be one MC-70-2A (Kitchen) and two
BC-70-2A (Bathrooms 1 & 2)
AM
Transfer
0 0 0 0
Ho t wa ter
te mp.
Clock Hour Min.
Cooler Hotter
Sound
ON/OFF
Vol.
M C -7 0 -1 A
Switching the System On
The hot water system can be switched on and off from any controller by pressing the 'ON/OFF'
button as shown. When the system is turned on, the monitors will be lit. During normal operation
the system is left on.
Transfer
0 0 0 0
Ho t wa te r
te m p.
Clock Hour Min.
Hotter
Sound Cooler
ON/OFF
Vol.
M C -7 0 -1 A
Setting the clock
See page 13 for details on setting the clock.
Setting the Sound Volume
See page 16 for details on setting the sound volume.
Using Hot Water
The hot water delivery temperature can be controlled from either the Kitchen Controller
(MC-70-2A) or Bathroom Controllers (BC-70-2A). See pages 16 to 17 for details on setting the hot
water delivery temperature for the Kitchen and Bathroom Controllers.
Shower Saver / Bath Fill Function
See pages 17 to 19 for details on the Shower Saver / Bath fill function. With two or more Bathroom
Controllers fitted (one in each bathroom) only one bath can be filled at a time.
CHECK WATER TEMPERATURE BEFORE USE.
A parent should always check the temperature before a child is placed in contact with hot water
CAUTION
Consumer safeguards: With the hot water tap open and a temperature of 43°C or higher selected, if the
temperature is decreased to below 43ºC, and then raised again the maximum available temperature
will be 43°C, in addition temperature 'priority' cannot be transferred between controllers.
NOTE
Repeat the relevant procedures above for the third (Bathroom) Controller.
- 25 -
- 21 -
.