Using 1 Deluxe Controller; Setting The Clock - Rinnai BC 70 2A Installation And User Manual

DELUXE TEMPERATURE CONTROLLERS

Using 1 Deluxe Controller

When one Deluxe Temperature Controller is required, the kitchen
model must be used (MC-70-2A).
Switching the system ON
The hot water system and controller can be switched on and off
pressing the 'ON/OFF' button as shown. When the system is
turned on, the monitor will be lit. During normal operation the
system is left on.

Setting the Clock

The clock is of the 12 hour AM/PM type.
Press the 'Clock' button. The digital monitor will flash AM
12:00.
Set the time using the 'Hour' and 'Min.' buttons. The time is
displayed on the monitor as the buttons are pressed. The
numbers on the monitor will continuously change if you keep
the buttons depressed. When you get close to the desired time,
press the button intermittently.
Press the 'Clock' button again to activate the clock.
The time is always displayed regardless of whether the Temperature Controller is turned ON or OFF.
The clock may need to be reset after a power failure.
NOTE
AM
Clock
ON/OFF
- 17 -
- 13 -
C
AM
Transfer
0 0 0 0
Hot water
temp.
Clock Hour Min.
Cooler Hotter
Sound
ON/OFF
Vol.
MC -70 -1A
C
AM
Transfer
0 0 0 0
Hot water
temp.
Clock Hour Min.
Cooler Hotter
Sound
ON/OFF
Vol.
MC -70 -1A
C
AM
0 0 0 0
Clock Hour Min.
Sound
ON/OFF
Vol.
C
0 0 0 0
Hour Min.
Sound
Vol.
C
AM
0 0 0 0
Clock Hour Min.
Sound
ON/OFF
Vol.