Using 2 Deluxe Controllers - Rinnai BC 70 2A Installation And User Manual

OPERATION WITH DELUXE TEMPERATURE CONTROLLERS

Using 2 Deluxe Controllers

When 2 Deluxe Temperature Controllers are used,
they must be models MC-70-2A (Kitchen) and
BC-70-2A (Bathroom).
Switching the System ON
The hot water system and both controllers can be
switched on and off from either controllers by
pressing the 'ON/OFF' button as shown. When the
system is turned on, the monitor will be lit. During
normal operation the system is left on.
Setting the Clock
The clock is of the 12 hour AM/PM type and is set on the
Kitchen Controller (MC-70-2A).
Press the 'Clock' button. The digital monitor will flash
AM 12:00.
Set the time using the 'Hour' and 'Min.' buttons. The
time is displayed on the monitor as the buttons are
pressed. The numbers on the monitor will continuously
change if you keep the buttons depressed. When you get
close to the desired time, press the button intermittently.
Press the 'Clock' button again to activate the clock.
The time displayed on the Kitchen Controller is automatically displayed on all Bathroom
Controller(s) when the Bathroom Controller(s) are ON. If the controllers are OFF, the time is
only displayed on the Kitchen Controller. The clock may need to be reset after a power failure.
NOTE
AM
Transfer
0 0 0 0 Ho t wa ter
tem p.
Clock Hour Min.
Sound Cooler Hotter
ON/OFF
Vol.
M C -7 0 -1 A
C
AM
Transfer
0 0 0 0
Ho t wa te r
tem p.
Clock Hour Min.
Sound Cooler Hotter
ON/OFF
Vol.
M C -7 0 -1 A
AM
Clock
ON/OFF
- 299 -
- 15 -
C
AM
0 0 0 0
Clock Hour Min.
Sound
ON/OFF
Vol.
C
0 0 0 0
Hour Min.
Sound
Vol.
C
AM
0 0 0 0
Clock Hour Min.
Sound
ON/OFF
Vol.