100Base-X Sfp Port - HP 3600 v2 Series Installation Manual

Item
Connector type
Interface attributes
Max transmission
distance
Transmission medium
Standards

100Base-X SFP port

The 3600-24-SFP v2 EI Switch provides 24 100Base-X SFP ports, and you can install the 100 Mbps SFP
transceiver modules in
Table 11 100 Mbps SFP transceiver modules available for the 3600 v2 Switch Series
Product
code
JD102B
JD120B
JD090A
JD091A
JD100A
JD101A
IMPORTANT:
You must use the HP X115 100M SFP LC BX 10-U transceiver (JD100A) and the HP X115 100M SFP LC BX 10-D
transceiver (JD101A) in pairs.
1000Base-X SFP port
Every 3600 v2 switch has four 1000Base-X SFP ports, including two combo ports paired with two
1000Base-T Ethernet ports, on the front panel.
available for the 3600 v2 Switch Series.
Specification
RJ-45
•
1000Mbps, full duplex
•
MDI/MDI-X, auto-sensing
100 m (328.1 ft)
Category-5 (or above) twisted pair cable
IEEE 802.3u
Table 1 1 in the ports.
Module description
HP X110 100M SFP LC FX
transceiver
HP X110 100M SFP LC LX
transceiver
HP X110 100M SFP LC
LH40 transceiver
HP X110 100M SFP LC
LH80 transceiver
HP X115 100M SFP LC BX
10-U transceiver
HP X115 100M SFP LC BX
10-D transceiver
Central
Fiber diameter
wavelength
(in μm)
(in nm)
1310 62.5/125
1310 9/125
1310 9/125
1550 9/125
TX: 1310
9/125
RX: 1550
TX: 1550
9/125
RX: 1310
Table 12 lists the 1000Base-X SFP transceiver modules
46
Max transmission
distance
2 km (1.24 miles)
15 km (9.32 miles)
40 km (24.86 miles)
80 km (49.71 miles)
15 km (9.32 miles)
15 km (9.32 miles)