Showing A List Of Authorized Groups; Deleting An Existing Group - AMX NetLinx Integrated Controller NI-4000 Instruction Manual

NetLinx Security and Web Server
5. Click OK to accept and save the changes made on this tab to the Master.
Clicking Delete removes the selected group from the list of authorized groups on the
Master.
Clicking Cancel voids any changes made within this tab, disables the security
configuration session, voids any changes made to the Master, and returns you to the
empty Security tab.
6. Successful modification of the new group results in an on-screen message
modified".
Each selection simply toggles the security setting from enabled to disabled.

Showing a list of authorized Groups

1. Click on the Security tab (FIG. 50).
2. Click the Modify Group link (on the left of the browser window) to populate the Security tab
with the access rights fields associated with a selected group.
3. Click the down arrow from the Select New Group field to open a drop-down listing of
authorized groups on the target Master.

Deleting an existing Group

1. Click on the Security tab. By default this tab is blank until a security option is selected from
the left of the browser window.
2. Click the Modify Group link.
3. Click the down arrow from the Select New Group field to open a drop-down listing of available
groups.
4. Select a group from the drop-down listing.
5. Click Delete to remove the selected group from the list of authorized groups on the Master.
6. Successful deletion of the group results in an on-screen message
74
"Group 'XXX'
"Group 'XXX' deleted".
NetLinx Integrated Controllers