System Displays - Honeywell L5200 Series User Manual

The following icons will be displayed on the Security Screen along with specific zone status information (if
applicable) to indicate system status.
DISPLAY DEFINITION
AC Loss
Alarm
(intrusion)
Armed Away
Armed Stay
Battery Low
Check Zones
CO Alarm
Disarmed Not
Ready to Arm
Disarmed
Ready to Arm
Door Open
Zone Status Icons
The following icons may be displayed on the Zone Status screen.
DEFINITION
ICON
Alarm
Fault (Yellow)
LED Status
Armed LED (Red): ON = System armed
OFF = System disarmed
Blinking = System armed, but a fault exists or alternating with Ready LED when Two Way Voice
(VOX or Talk), speaker phone or programming mode is active.
Ready LED (Green): ON = System disarmed, ready to arm
Blinking = System disarmed, not ready to arm (a fault exists) or alternating with Armed LED
when Two Way Voice (VOX or Talk), speaker phone or programming mode is active.
Note: When the system is armed, the Ready LED turns off.
SUMMARY OF AUDIBLE & VISUAL NOTIFICATIONS
DISPLAY DEFINITION
Window Open
Exit Active
Fire
OR
Heat Sensor
Flood
Glass Break
Medical Alarm
Motion
Temperature
Reporter
Failure
DEFINITION
ICON
Trouble (red)
Bypass
– 67 –

System Displays

DISPLAY DEFINITION
Cover
Tamper
Trouble
90 RF Jam
Automation
(Z-Wave Node
Failed)
WiFi source
present
No WiFi source
Fault *
Garage Door
94 Phone
Line Cut
103 Comm.
Trouble
DEFINITION
ICON
Ready