Organizing The Ac Power Cord; Running Initial Setup - Sony Bravia KDL-52EX707 Setup Manual

3
Anchor the TV to the Wall.
Anchor the TV to the wall by using bolts, wall
anchor and chain (or rope).
~
• Your TV is shipped with screws attached to the
rear of the TV. (They are fastened in the screw
holes for wall mounting.) Be sure to remove the
upper two screws prior to anchoring the TV on a
wall.
• Securing the TV to the stand without securing
the TV and the stand to the wall provides
minimum protection against the TV toppling
over. For further protection, be sure to follow the
three measures recommended.
Anchor bolts (not supplied)
Wall-
mount
holes
Organizing the AC power
cord

Running initial setup

1
Complete your cable connections
before proceeding with the Initial
Setup.
Connect the TV to your nearest power
Rope
outlet.
or
chain
2
For EX707 and EX705 models, check
(not
the ENERGY SAVING SWITCH
supplied)
setting is on (z).
3
Press POWER on the TV.
Wall-anchor
When you switch the TV on for the first
(not supplied)
time, the Language menu appears on
the screen.
4
Follow the instructions on the screen.
~
• The ENERGY SAVING SWITCH must be
on (z) to set the clock.
• Home mode sets the TV to display the settings
optimized for home viewing.
Initial Setup
Bem-vindo! Selecione um idioma
Português
Continue Choose
EX707/EX705
models only
Initial Setup
Bem-vindo! Selecione um idioma
Português
Continue Choose
POWER
11