Specifications - Sony Bravia KDL-52EX707 Setup Manual

Specifications

System
Television system
Channel coverage
Panel system
Speaker output
Input/Output jacks
CABLE/ANTENNA
VIDEO IN 1/2/3
COMPONENT IN 1/2
HDMI IN 1/2/3/4
AUDIO OUT
HEADPHONE
DIGITAL AUDIO OUT
(OPTICAL)
PC IN
PC/HDMI 4 AUDIO IN
LAN
USB/DLNA
* For LAN connections, use a Category 7 10BASE-T/100BASE-TX cable (not supplied).
18
Analog: NTSC 3.58 (for EX707/EX607 models)
NTSC 3.58 / PAL-M / PAL-N (for EX705/EX605 models)
Digital: DVB-T (for EX707/EX607 models)
SBTVD (for EX705/EX605 models)
VHF: 2-13, UHF: 14-69
CATV (Analog): 1-125
LCD (Liquid Crystal Display) Panel
10 W + 10 W
75-ohm external terminal for RF inputs
VIDEO / AUDIO
YP P (Component Video)
B R
Signal format: 480i, 480p, 720p, 1080i, 1080p (for EX707/EX607 models)
480i, 480p, 576i, 576p, 720p, 1080i, 1080p (for EX705/EX605 models)
AUDIO
HDMI: Video: 480i, 480p, 720p, 1080i, 1080p, 1080/24p (for EX707/EX607 models)
480i, 480p, 576i, 576p, 720p, 1080i, 1080p, 1080/24p (for EX705/EX605 models)
HDMI: Audio: Two channel linear PCM 32, 44.1 and 48 kHz, 16, 20 and 24 bits, Dolby Digital
AUDIO (HDMI IN 4)
500 mVrms (typical)
Stereo mini jack
PCM/Dolby Digital optical signal
D-sub 15-pin, analog RGB
Stereo mini jack
10BASE-T/100BASE-TX connector (Connection speed may differ depending on the network environment.
10BASE-T/100BASE-TX communication rate and communication quality are not guaranteed for this TV.)*
Refer to the i-Manual for supported format.