Changing The Light Bulb; Troubleshooting - Blanco Oven Installation Manual

Changing the light bulb ?

Troubleshooting

IF YOU REALIZE
THAT
The display panel is
not lit up.
The light doesn't
work.
Water or steam
leaking from the door
during cooking.
In all cases, if you are unable to solve the problem yourself,
please contact the After-Sales Service without delay.
The
corner.
changing the bulb in order to safe-
guard against electric shocks.
- Turn the cover slightly anti-clockwise (left).
- Unscrew the bulb the same way.
The bulb is a :
- 25 W
- Type E14 suitable up to 300ºC
- Change the bulb and reassemble the unit
making sure the seals are positioned correctly.
- Switch the oven back on at the mains.
POSSIBLE
CAUSES
A fault in the oven
electrical supply.
Electric card out of
order.
The bulb needs
replacing.
The oven is not
switched on at the
mains.
The fuse has blown.
The door is not shut
correctly.
The door seal is
faulty.
bulb is by
Always switch the oven off at
the mains
WHAT SHOULD
YOU DO?
- Check that the tank
has been pushed in
completely.
- Contact the After-
Sales Service.
- Change the bulb.
- Switch the oven on
at the mains.
- Change the fuse.
- Contact the After-
Sales Service.
the far right
before
- 220/240 V
19