Display Preferences; Your Programmable Room Thermostat; Before You Start - Danfoss TP7000 Series User Manual

1.0 User Instructions

1.1 Your programmable room thermostat

The TP7000 allows you to programme up to 6 diff erent time and
temperature settings for each day of the week, providing complete
fl exibility. It provides several energy saving features and features
several useful user overrides, including a 99 day holiday mode.
1.2 Preset Programmes
GB
Your TP7000 comes ready programmed with a set of operating times
F
and temperatures which often suit most people.
D
Weekdays (Mon-Fri)
Event
ES
1
DK
2
3
NL
4
5
I
6
GR
If you want, you can change any of these settings by following the
instructions on pages 8-9. First follow the steps on pages 6-7 to set
PL
your display preferences and the correct time and date.

1.3 Before you start

LT
Open the fl ap on the front of your
CZ
programmer. Using a non-metallic object,
press the recessed RESET button, until you
HR
hear a click and the display goes blank.

1.4 Display Preferences

Temperature display (°C or °F)
Press and hold DAY & COPY (for 2-3 seconds)
until display changes.
6
Time Temp °C
06:30 20
08:30 15
11:30 20
13:30 15
16:30 21
22:30 15
Weekend (Sat-Sun)
Event Time
1 07:30
2 09:30
3 11:30
4 13:30
5 16:30
6 22:30
RESET
TP7000 RANGE
Temp °C
20
20
20
20
21
15