Charge The Battery - Nokia N86 8MP User Manual

N86 8mp
Hide thumbs Also See for N86 8MP:
Table of Contents

Advertisement

2.
If the device asks for a PIN code
or lock code, enter it, and
select OK. The preset lock code
is 12345. If you forget the
code and your device is locked,
your device will require
service and additional charges
may apply. For more
information, contact a Nokia
Care point or your device dealer.
To switch off the device, press the power key briefly,
and select
Switch

Charge the battery

Your battery has been partially charged at the
factory. There may not be a need to charge the
battery in advance. If the device indicates a low
charge, do the following:
14
off!.
© 2010 Nokia. All rights reserved.
Regular charging
1.
Connect the charger to a wall
outlet.
2.
Connect the charger to the
device. The charging indicator
light next to the USB connector
is lit when the battery is being
charged.
3.
When the device indicates a
full charge, disconnect the
charger from the device, then
from the wall outlet.
You do not need to charge the
battery for a specific length of
time, and you can use the device while it is charging.
If the battery is completely discharged, it may take
several minutes before the charging indicator
appears on the display or before any calls can be
made.
Tip: Disconnect the charger from the wall
outlet when the charger is not in use. A
charger that is connected to the outlet
consumes power even when it is not
connected to the device.

Advertisement

Table of Contents
loading

Table of Contents