Installing Joinme - Zte New Zealand R7 User Manual

12.2 Installing JoinME

Please install the JoinME CD before connecting the phone to the computer.
• Insert the CD provided into the computer
• The CD will auto-start after a few seconds
• If auto run does not start then run Setup.exe from the CD
• The installation shield will launch and guide you through the installation
• Please follow the prompts to install the software
• When the installation is complete plug the handset into the computer using
the USB lead supplied
• The USB lead is unique and should not be used for other devices (It is not
the same as digital camera leads)
• When the handset is plugged in the computer will automatically install the
drivers. If this fails consult our website for more help or access Windows
Device Manager to update the drivers. See www.zte.co.nz for instructions
Note
If the phone is connected to the computer before installing the CD then the
drivers will not be installed correctly.
• Unplug the phone, un-install then re-install JoinME
• See www.zte.co.nz for more assistance
12
65