What Is The Handset Code; Additional Notes On Pin Codes - Zte New Zealand R7 User Manual

Hsdpa multi band 3g mobile phone

Table of Contents

7.14 What is the Handset Code?

Menu > Settings > tab right to Security > Activate Security Codes > Handset

Code

• The Handset Code is stored on the handset and protects against unwanted

use. If the handset is lost or stolen it cannot be switched on without the

handset lock code. This provides a greater level of protection than the PIN

code which protects the USIM card only. The default code is 0000

• Select On or Off and enter the Handset code, 0000.

• To change the Handset Code select Change Security Codes and enter a new

code of your choice

• It is important to remember this code as it cannot be reset once it is lost or

forgotten

• The PIN and PUK Codes are provided by your Service Provider

• If you enter the PIN number incorrectly three times the phone will be PUK

locked

• Contact your service provider to get the PIN Unlocking Key (PUK code)

• PIN2 Code is an additional PIN on the USIM card and is not generally supported.

Table of Contents

Telecom new zealand r7