Time Zone; Network - Lorex LW2750 Series User Manual

14 Settings
1. Press , then push the joystick to select Settings.
2. Select Default Settings and push the joystick to confirm.
3. Select Yes and then push the joystick to confirm. The system takes a few moments to
restore default settings.
4. Press until all menus are closed.

14.2 Time Zone

Select the time zone where the system is being used. The time zone menu is also used to
enable Daylight Savings Time.
To set the time zone:
1. Press , then push the joystick to select Settings.
2. Select Time Zone and push the joystick to confirm.
3. Move the joystick up / down to change the time zone.
4. Push the joystick to save your settings.
The system time will be automatically updated according to the time zone you have
selected.
5. Press until all menus are closed.
To enable / disable Daylight Savings Time:
1. Press , then push the joystick to select Settings.
2. Select Time Zone and push the joystick to confirm.
3. Move the joystick left / right to select Automatically adjust Clock for Daylight Sav-
ings Time, then move the joystick up / down to turn Daylight Savings Time on or off.
4. Push the joystick to save your settings.
5. Press until all menus are closed.

14.3 Network

Configure the receiver's IP address (advanced), view network information, or reset your re-
mote access password.
#LX400011; r. 1.0/11916/13451; en-US
36