Preparing For Use - Royal Sovereign ARP-8126 SERIES Owner's Manual

pRepaRInG foR uSe

The instructions below will enable you to prepare your air conditioner for operation as efficiently as possible.
Before use, please ensure the air intake and outlet grilles are unobstructed.
Installation
Just a few simple steps and your comfort is ensured with your portable air conditioner:
part 1: Fit∙the∙air∙exhaust∙hose∙in∙the∙housing∙at∙the∙back∙of∙the∙unit∙(fig.∙1).
1. Fit the window outlet to the end of the hose.
2. Place the air conditioner near a window or French window. Adjust the length of the hose to reach the window.
3.∙Ensure∙the∙air∙exhaust∙hose∙is∙unobstructed.
part 2: Open∙the∙window∙or∙French∙window∙slightly∙and∙position∙the∙outlet∙(fig.∙2).
part 3: If∙you∙have∙a∙sash∙window,∙place∙the∙bracket∙on∙the∙window∙sill,∙extend∙the∙bracket∙fully∙within∙the∙window∙frame∙fix∙the∙bracket∙by∙using∙the∙pin,
∙then∙lower∙the∙window∙onto∙the∙bracket.∙Insert∙the∙window∙outlet∙of∙the∙exhaust∙hose∙into∙the∙Slot,∙then∙connect∙the∙hose∙to∙the∙air∙conditioner(fig.3).
part 4: If∙you∙have∙a∙double∙window,∙use∙the∙sucker∙provided∙to∙hold∙the∙two∙parts∙of∙the∙window∙together∙(fig.∙4).
* Keep∙the∙air∙hose∙as∙short∙and∙free∙of∙curves∙as∙possible∙to∙avoid∙bottlenecks∙and∙ensure∙maximum∙efficiency.
Fig. 1. Fig. 2. Fig.∙3.
6
Fig. 4.