Correct Use; Using The Remote Control - Royal Sovereign ARP-8126 SERIES Owner's Manual

coRRect uSe

 Point the remote control at the unit.
The remote control must be no more than 7 metres away from the unit
∙(without∙obstacles∙between∙the∙remote∙control∙and∙the∙receiver).
 Handle∙the∙remote∙control∙with∙extreme∙care.
∙Do∙not∙drop∙it∙or∙expose∙it∙to∙direct∙sunlight∙or∙sources∙of∙heat.
Inserting or replacing the batteries
•∙Remove∙the∙cover∙on∙the∙back∙of∙the∙remote∙control;∙
•∙Insert∙two∙∙"AAA"∙∙batteries∙in∙the∙correct∙position∙(see∙instructions∙inside∙the∙battery∙compartment);
•∙Replace∙the∙cover.
 Batteries should be removed and discarded in accordance with municipal bylaws.
To cancel the settings programmed on the remote control and restore the original settings, press the ReSet button lightly with the point of a pencil or pen.

uSInG tHe ReMote contRol

Refer to the instructions in the chapter Operating from the control panel to turn the unit on and to select the
operating mode (COOL, DRY, FAN, HEAT or SMART) and the fan speed. The following section describes the
additional functions corresponding to the controls on the bottom part of the remote control.
powerful function
•∙Ideal∙for∙the∙summer∙to∙cool∙rooms∙rapidly.
•∙Activate∙by∙simply∙pressing∙the∙poweRful button.
•∙∙ T he∙unit∙operates∙in∙air∙conditioning∙mode∙at∙maximum∙fan∙speed.
While this function is active, you cannot set the temperature and fan speed manually.
MODE
Fig. 17.
12
MAX 7 metres (23 ft)