Using The Phone Company's Special Services; Editing Service Numbers - Radio Shack 900 MHz Digital Spread Spectrum CordlessTelephone Owner's Manual

USING THE PHONE
COMPANY'S SPECIAL
SERVICES
Your phone supports advanced calling ser-
vices provided by many phone companies,
such as Return Call, Repeat Dial, 3-Way
Calling, or Cancel Call Waiting.
To use these features, you must be in an
area where these services are available and
Your phone is preprogrammed for these special services:
Preprogrammed
Feature
Return Call The service retains the number of the party that called you last and
automatically dials that number. Return call is useful if you miss an
incoming call.
To connect a third party to your line, press 3-Way Call while you are
3-Way Calling
on the line with the second party. When you hear a dial tone, dial the
third party's number and when the third party answers, press 3-Way
Call again.
Repeat Dial When you get a busy signal or you want to redial the last number you
called, the service continuously redials the number and rings your
phone once the call goes through.
Cancel Call Waiting Temporarily cancels your Call Waiting service. This is useful when
you also use your telephone line for internet service or sending/
receiving faxes. Press Cancel CW prior to dialing the internet or fax
number. Call Waiting is restored when you disconnect the call.

Editing Service Numbers

You can change the numbers stored in any
of the four service locations if your phone
company uses different number sequences
from the programmed ones.
Follow these steps to edit a key sequence.
1. Press . The TALK/LOW BATT indi-
MEM
cator blinks.
2. Enter the key sequence, up to 20 digits.
3. Press .
MEM
12
you must subscribe to the services through
your phone company.
Important: Some phone companies use dif-
ferent key sequences to achieve these fea-
tures. Each section shows the built-in key
sequence. If your phone company uses dif-
ferent sequences, you must edit the se-
quences before using the services. See
"Editing Service Numbers".
Description
4. Press the service dial button you want to
use. A tone sounds.
Notes:
• When you press
mode, a series of beeps sounds and the
store mode cancels.
• You can also use the service dial but-
tons as the standard memory. You can
use them as standard memory if you live
in an area where no service is available.
See "Memory Dialing" on Page 13.
Operation
Key
Sequence
69
Flash
66
70
FLASH in number store