Bitwriter Only Options; Bitwriter Feature Descriptions - Directed Electronics 4103, 4-button series Installation Manual

Bitwriter only options

If programming with the Bitwriter®, the learn routine can be locked or unlocked. If the learn routine
has previously been locked, it must be unlocked with Bitwriter® - this cannot be done manually with
the Valet button.
The Bitwriter® gives you access to a wider range of system options. These features and the adjustments
that may be programmed are described in the table below.
Menu Item Feature
1 Engine Runtime
2 Diesel start type
Diesel start delay time
3
(seconds)
4 Virtual Tach Fine Tune
5 Remote control pro-
gramming
6 Feature Programming

Bitwriter feature descriptions

1. Engine runtime:
Sets engine runtime during normal remote start operations from 1-60 minutes.
2. Diesel Start Type:
OFF: there is no delay before the engine cranks with the remote start
Timed: turns on the timer for the delay before the engine cranks (to be used in conjunction with the
Diesel Start Delay).
3. Diesel start delay:
Sets the delay before engine crank in 1 second intervals from 1- 90 seconds for diesel engine
vehicles.
4. Virtual tach fine tune:
Adds or subtracts crank time in VirtualTach mode to overcome engine types that short crank or
over-crank on the first start attempt.
5. Remote Control Programming:
Locks and unlocks the user's ability to enter the remote control/reset menu, and manually change
any functions using the Valet Button.
6. Feature Programming:
Locks and unlocks the user's ability to enter the feature menus and manually change the main unit
programming using the Valet Button.
© 2012 Directed. All rights reserved.
Default Options
12 min. 1-60 min.
Off Timed
1-90 sec.
15 sec
Not initialized 0 to 1 second in 50 millisecond increments
Unlocked Locked
Unlocked Locked
15