Understanding The Display; Additional Display Messages; Sub Bank Messages - Radio Shack PRO-404 User Manual

Understanding the Display

Row 1
– Signal Stalker II search is active.
BANK – Appears with numbers (1–10) to indicate
the scan bank. The bar under the bank number shows
banks that are turned on for scanning.
– Keypad locked.
Row 2
WX – Searching weather channels.
MAR – Searching the marine bank.
FD/PD – Searching the fire/police bank.
AIR – Searching the aircraft bank.
HAM – Searching the amateur radio bank.
Row 
– Skywarn channel active.
000 – Channel number the scanner is tuned to.
CH – Appears with channel number (1–200) or P
(priority channel).
– Frequency the scanner is tuned to.
000.000
0
– Batteries are low.
B
– A locked out channel/frequency is manually
L/0
selected or reviewed.
Row 4
e d (Up/Down) – Search or scan direction.
SRCH – Searching a service bank.
SCAN – Scan mode.
MAN – Manual mode.
PGM – Program mode.
PRI – Priority feature is active.
DLY – Two-second delay is active.
12

Additional Display Messages

ALL CH L-out – All channels locked out during scan
or marine band search .
b X Ch-FULL – All displayed bank channels are full.
b X StorE – Frequency programmed into displayed
bank's channel.
CLOnE – Clone mode.
-dUPL- – Frequency is already stored in another channel.
Error – Entry error.
FLo ALL-CL – All the locked-out frequencies
removed during a FD/PD, AIRCRAFT, HAM, or Signal
Stalker II search.
L-r – Review the locked-out frequencies.
L-O Fr-FULL – Maximum of 50 frequencies already
locked out.
oFF tonE – Key tone deactivated.
On tonE – Key tone activated.
P – Scanner is tuned to the priority channel.
-t- – Tune mode.

Sub Bank Messages

Lo VHF – Sub-bank 1 of the fire/police bank.
Hi VHF – Sub-bank 2 of the fire/police bank.
UHF – Sub-bank 3 of the fire/police bank.
10 M – Sub-bank 1 of the HAM bank.
6 M – Sub-bank 2 of the HAM bank.
2 M – Sub-bank 3 of the HAM bank.
70CM – Sub-bank 4 of the HAM bank.
Row 1
Row 2
Row 3
Row 4
1