TRENDnet SecurView Pro User Manual page 23

TRENDnet User's Guide

Communication Settings.
o
Serial Port – The communication port has to match the
communication port that the RS232/485 controller is connected.
o
Port Speed (Baud Rate) – Baud rate has to match the baud rate of
your PTZ camera.
o
Device Identifier – Device Identifier, is a unique ID that has to be set
on PTZ cameras. Having multiple PTZ cameras requires a unique id to
be set on every individual PTZ camera. Failing to assign a unique id to
every single PTZ camera will result for all cameras to move at the same
time.
8. Click Apply to save the settings.
9. Click OK to exit the properties window.
10. Back in the setup wizard, click Next.
11. The "Motion Analysis" window appears.
© Copyright 2012 TRENDnet. All Rights Reserved.

Use Motion for the steam being set up- This box should be checked if you are
interested in using Motion Detection. We recommend you use motion
detection for it will save you an abundance of well-needed storage space.
Choose Properties
12. Click Properties.
Sensitivity Tab
Properties > Sensitivity
SecurView Pro
22